SOC-4 is a paraffinic base oil with very high viscosity index (VHVI). The high quality of this product is available by using selected feed and complementary refining processes. This base oil is used in the manufacture of a wide range of lubricants, including a variety of gasoline and diesel engine oils, gear, turbine, hydraulic, compressor and other industrial oils. Low sulfur content and high level of saturated compounds and viscosity index value above 120, this oil is classified as Group III oils according to API classification. This oil is sold in bulk and packaged in barrels, flexi and IBC.
Types of diesel and gasoline engine oils Types of gas and dual-fuel engine oils Types of industrial lubricants including turbine, hydraulic and compressor Types of gear oils As a solvent in the manufacture of some additives
Advantages
Excellent performance properties at low temperatures Very bright color High oxidation and thermal stability Good friction behavior and abrasion reduction Excellent viscosity stability Very high viscosity index Very low sulfur content A small percentage of unsaturated compounds With excellent water separation properties
Packings
IBC
Flexi tanks
Ideally, lubricants should be stored indoors, away from direct sunlight or snow and rain, to maximize the life of the oil or grease. If the storage environment temperature does not change suddenly and is kept in the temperature range of 25., It will help to maintain the quality of the lubricant. This product is not corrosive and its storage in ordinary steel containers is unobstructed
This product is stable and non-corrosive in environmental conditions and does not cause itching of the skin and eyes. Avoid frequent and prolonged contact with used oil. In case of skin contact, wash with soap and water. Deliver used oils to collection centers to protect the environment.
Feature | Unit | Test method | Result |
Kinematic viscosity at 100 ° C | mm2/s (cSt) | ASTM D-445 | 4.36 |
Cinematic viscosity at C40 | mm2/s (cSt) | ASTM D-445 | 20.3 |
Viscosity index (VI) | — | ASTM D-2270 | 120 |
Density at C ° 15.6 | Kg/m3 | ASTM D-4052 | 835 |
Flash point | °C | ASTM D-92 | 210 |
Pour point | °C | ASTM D-97 | 9- |
TAN | mg KOH/gr | ASTM D-664 | 0.03 |
The amount of sulfur | ppm | ASTM D-3227 | 200 |
Percentage of saturated compounds | W% | Analysis | 98 |
Color | — | ASTM D-1500 | 0.1 |
CCS @ -15oC | mPa.s | ASTM D-5293 | 996 |
CCS @ -25oC | mPa.s | ASTM D-5293 | 1620 |